Best Phone Holder Mounts for Peugeot 308 & 3008

Peugeot's i-Cockpit is not a minor design detail – it is a fundamental rethinking of how a driver interacts with the car. The tiny steering wheel, the raised instrument cluster (viewed over, not through, the steering wheel), and the head-up display emphasis all conspire to make phone mount placement in a 308 or 3008 a more nuanced decision than in almost any other car in this guide. Get it right and the phone integrates naturally into your driving view. Get it wrong and it blocks critical information or forces dangerous head movements.

Understanding the i-Cockpit Before Choosing a Mount

In a standard car, you look through the top of the steering wheel to see the instrument cluster. In a Peugeot with i-Cockpit, the cluster is positioned higher – you look over the top of the (deliberately smaller) steering wheel to see it. This shifts your entire gaze pattern upward compared to other cars.

The consequence for phone mounts: a vent mount at center dashboard level – which is perfectly fine in a Toyota or Ford – may now sit in your direct sightline to the instrument cluster. The phone effectively becomes an obstacle between your eyes and your speed, RPM, and warning indicators. This is why mount placement in a Peugeot requires specific thought, not just a copy of what works in another car.

Peugeot 308 (Mk3, 2021–2024): Mount Strategy

The third-generation 308 (2021-onward) features a 10-inch portrait touchscreen integrated into the center stack and a 10-inch digital instrument cluster. The i-Cockpit layout is fully realized – the small steering wheel, the high cluster, and the large central touchscreen define the interior experience.

308 Vent Positions

The 308 Mk3 has a distinctive vent arrangement. Rather than traditional horizontal vents at dashboard center, it features a long horizontal vent strip running across the full width of the dashboard – a design feature that also functions as a vent. The individual vent blades within this strip are narrower and more design-integrated than in most cars.

Standard vent clip mounts will fit in the 308 Mk3 vents, but with caveats: the blade geometry is non-standard, and the clip needs to grip only the blade (not the surrounding trim strip) to avoid cracking the trim. Use a mount with flexible rubber jaw tips that conform to the blade shape rather than rigid plastic jaws.

308 Mount Placement: The Critical Zone

In the 308, the area directly above the center touchscreen and below the windshield is the safest phone mount zone – it does not obstruct the raised instrument cluster. An adhesive pad mount or a suction mount positioned here keeps the phone above the touchscreen and below the windshield base, in the driver's peripheral vision but clear of the cluster sightline.

Avoid positioning a mount at the traditional center-vent height in the 308. At this height, the phone will sit precisely in the line of sight from the driver's eyes to the raised cluster. Even partial obstruction at this point forces compensating head movements.

Peugeot 3008 (Mk2 and Mk3): SUV Advantages

The second-generation 3008 (2016–2023) and third-generation (2024-onward) are SUV-based – higher seating position, more vertical windshield base, and a slightly different i-Cockpit geometry. The raised seating position in the 3008 partly mitigates the instrument cluster sightline issue because the driver's eyes are higher relative to the dashboard. The cluster-to-phone-mount conflict is less severe in the 3008 than in the lower-riding 308.

3008 Mk2 Vent Layout

The Mk2 3008 has a more conventional vent arrangement than the 308 Mk3 – horizontal vents at center and outboard positions. The center vents are positioned at a height that, given the SUV seating position, does not conflict with the raised cluster. A standard dual-arm vent clip on the center-left vent works reliably in the Mk2 3008 without the sightline issues present in the 308.

3008 Mk3 (2024-onward)

The third-generation 3008 (available as 3008 E-Tech Electric) introduced an even more dramatic interior with a 21-inch panoramic screen dominating the dashboard. On this vehicle, conventional phone mounts become largely redundant – the panoramic screen is large enough to serve as a CarPlay/Android Auto display, and there is minimal dashboard space for a separate phone mount anyway. Most drivers of the 3008 Mk3 will find the factory screen is the superior solution.

i-Cockpit Head-Up Display (HUD) Conflict

Higher trims of both the 308 and 3008 include a color head-up display (HUD) projected onto the windshield. If your Peugeot has HUD, this changes windshield mount planning significantly: the HUD projection area on the lower windshield (typically a 200 mm wide zone centered ahead of the driver) must remain clear. A suction mount in this zone will sit inside the HUD projection area and appear as a shadow over the projected information.

For Peugeots with HUD: use an adhesive pad mount positioned above the center touchscreen (the safe zone described above), or use a vent mount positioned on the driver-side vent cluster – which is outside the HUD projection path.

Ergonomics and Driver Fatigue

Peugeot's i-Cockpit is designed to reduce driver fatigue by keeping critical information within a tight visual field. Adding a phone at the wrong position undoes this benefit – frequent large gaze shifts between phone and cluster increase cognitive load. Invest extra thought in mount position in a Peugeot compared to other cars: the ergonomics payoff is larger if you get it right.

Alternatives Worth Considering

Given the i-Cockpit's complexity, Peugeot 308 and 3008 owners may find that an Android head unit – if compatible with their model – provides a cleaner solution by integrating navigation into the existing display ecosystem rather than adding another screen to an already complex visual environment.

For a mount engineered specifically for Peugeot interiors, the OEM Motion 15W wireless charging phone holder for Peugeot 2008 demonstrates the blade-grip engineering and vibration resistance you should demand from any vent mount you put in a car you care about. Browse the full phone mounts collection or explore all Peugeot accessories.

Summary

308 Mk3: avoid center vent height – use the zone above the touchscreen with an adhesive or suction mount. If using a vent mount, choose driver-side outboard vent with flexible rubber jaw clips. 3008 Mk2: center-left vent with a standard dual-arm clip – the SUV seating position makes the sightline issue less critical. 3008 Mk3 with panoramic display: consider using the factory screen for CarPlay/Android Auto and skip a separate phone mount entirely. Always check HUD projection zones before placing a windshield suction mount in any Peugeot.